Monday, March 19, 2018

AP602 SIP VoIP Paging Terminal (Two(2) Fast Ethernet, 40watt Internal Digital AMP. Volume Up,Down Button, Alam & RelayOut Interface)






Main Features

- Standard SIP Protocol and AddPac Proprietary Protocol Support 
- RTP/RTSP Transport Protocol Support 
- RISC + Voice DSP Embedded H/W Architecture 
- 40Watt Digital AMP. (Option)
- Two(2) 10/100Mbps Fast Ethernet 
- Various High Quality VoIP Codec Support : 
G.722(16Hz), G.711,G.726,G.729A,G.723,1 etc
- I/O Interface S : Alarm Input 1-Port, Relay Output 1-Port, I2C Interface
- Volume Up/Down Button



Voicefinder AP602 SIP paging terminal provides high-performance SIP signaling based VoIP paging service for bank, securities, military, large enterprise, and government. 
AP602 SIP paging terminal should be used together with SIP paging server for dedicated IP paging service, or can be connected to legacy SIP call manager like as IP phones for SIP paging service. Generally, SIP call manger supports the SIP paging service for simple paging service via IP phones. Using SIP VoIP signaling and internal 40watt digital amplifier, AP602 performs SIP paging service for overall room paging announcement. At front side, this device provides UP, DOWN volume button for easy speaker volume control.  Also, AP602 SIP paging terminal supports internal 40watt digital AMP. to connect external speaker for various VoIP based paging service environment. Removed Tag Filtered
AP602 SIP paging terminal provides excellent performance and satisfaction for integrated security management environment like as intrusion detection application (government oil station, military, national power plant, etc). Installation and management is very simple. Beginners can handle the device easily. Removed Tag Filtered

DSP Hardware Type High Performance SIP Paging Terminal

AddPac SIP paging service solution consists of SIP paging server, SIP paging management system and AP602, AP1605 SIP paging terminals. Designed on the foundation of high performance embedded RISC CPU + Voice DSP, AP602 SIP paging terminal supports two(2) 10/100Mbps fast ethernet interface, one(1) port RS232C console port.
Providing built-in 40watt internal digital amplifier, AP602 SIP paging terminal is designed to support VoIP (Voice over IP) paging service without external amplifier via directly connected to SPEAKER. And, this paging terminal supports high quality 16KHz G722 voice codec beside traditional 8KHz G.711, G.726, G729A, G.723.1,etc.


Real Time Live VoIP Paging Service 

AddPac SIP based paging solution opens a whole new world of high quality real time audio/voice broadcasting service based on the high performance and stability RISC + DSP embedded hardware. DSP based voice compression technology and real-time transmission network technology like as RTP, RTSP protocol supports stable VoIP paging service under general data combination network through QoS algorithm. Especially, a user may setup an appropriate bit rate in accordance with network status so that it would accept from low bandwidth to high bandwidth.

High Quality SIP Paging and Supplementary Service 

A various IP based VoIP paging solution is widely recognized throughout the world in terms of its stability and performance. AP602 SIP paging terminal will satisfy the various needs of customer demand for IP based audio/voice paging service. It supports stable voice paging service in internet network with AddPac QoS (Quality of Service) algorithm.



Hardware Specification

Microprocessor
High-End RISC + DSP Processor
Memory
Flash Memory 
4MB FLASH MEMORY
SDRAM Memory
32MB SDRAM
Network
LAN Port
Two(2) 10/100Mbps Fast Ethernet (RJ45)
Console
Console Port
One(1) RS-232C Interface (RJ45)
Volume
Volume Control
Up, Down Volume Control Button
VoIP Codec

G.722(16KHz), G.711,G.726, G.729A, G.723.1, etc 
 Audio Interface
Model : AP602
Audio IN : MIC
Audio OUT : SPK Out
Model : AP602A
Audio IN : MIC
Audio OUT : SPK.Out
AMP. Speaker Out (Built-In Amplifier)
8ohm Speaker : 40Watt
External Power : 24V DC
I/O Interface
Alarm 1-Port, Relay 1-Port, I2C Interface
Power Requirement
Input : VAC 110~220V, 50/60Hz, 5V 2A
Operating Temperature
0°C to + 50°C (32° to 122°F)
Storage Temperature
-40°C to + 85°C (-40° to 176°F)
Relative Humidity
5% ~ 95%
 Dimension
28mm x 125mm x 90mm (H x W x D)
 Weight(kg)
0.5Kg


Diagram 





No comments:

Post a Comment