Sunday, August 5, 2018

VoiceFinder AP1810E Digital VoIP Gateway

High Performance & High Reliance Digital VoIP Gateway 

VoiceFinder AP1810 is a cost effective new digital VoIP gateway supporting maximum digital two(2) E1/T1 voice interface channels.  Digital interface of AP1810 provide an optimized call scenario when it interoperates with conventional PBX and PSTN. Compact cost effective design and system architecture of AP1810 provides customer satisfaction in high quality, performance and system reliance.

Supports Up to Two(2) Digital E1/T1 Interface 

VoIP gateway combining IP-PBX is now suggesting a new model for a main voice communication solution. In order to be a part of advanced VoIP communications naturally in the future, making an excellent choice of choosing VoIP gateway is essential. VoiceFinder AP1810E is a mid-range VoIP gateway providing total two(2) digital E1/T1 interfaces. It is suitable for general enterprises, large and public offices. It has functions as a media gateway which interoperates with IP-PBX and it enables to replace medium and large size digital PBX. Especially AP1810E provides an optimal solution of VoIP communications in telephony environments that using telephone lines and PBX to get connect with a head office.

Powerful Network·CPU Interface
AP1810E is designed to provide high-performance service as a media gateway. It provides LEDs on the front panel indicating operational status, line status, and LAN Interface status of gateway. Two of 10/100Mbps fast Ethernet port and RS232C console interface are the base for delivering various network services such as LAN-to-LAN routing, Bridge and NAT/PAT service etc

High quality of communication and additional services
Various VoIP gateway series of AddPac is approved for its high performance and reliability in world wide markets. AddPac provides highly advanced VoIP services in order to meet demanding and evolving business requirements of customers. Especially AP1810E has been developed through years of experiences and accumulated know-how from existing enterprises and communication markets. AP1810E provides concurrent dual VoIP signaling stack such as H323, SIP and QoS (Quality of Service) for high quality of communication service. This will satisfy customers with high expectation.

 Main Features

High performance RISC Microprocessor Architectures
High-performance VoIP Modular Architecture

One(1) Voice Interface Slots

1-Port VoIP Digital E1/T1 Interface Module(1 x RJ45)

2-Port VoIP Digital E1/T1 Interface Module(2 x RJ45)

Supports maximum two(2) E1/T1 digital interfaces

Flash Memory: 512MB, DDR2 128MByte High Speed Memory

Digital voice interface module:1-port digital E1/T1 Interface Module, 2-port digital E1/T1 Interface Module

Two port 10/100Mbps fast Ethernet interface

SIP, H.323 concurrent dual VoIP signaling stack

Support Voice Processing Features
- VAD, DTMF,CNG,G.168, and T.38 G3 Fax Relay
- G.723.1,G.729A,G.711 Voice Compressions

High-performance IP-Routing Capability with Reliability

Static and IEEE 802.1Q VLAN Routing Protocols including VRRP

Traffic Queuing, and SNMP MIB v2 for Network Management Features

Standard & Extended Access List for Security Functions

Essential Scalability Features such as DHCP Server & Relay, NAT/PAT, IEEE Transparent Bridging,
IP Accounting, and Debugging/Diagnostics, etc.
- DNSProxy Support
- UPnP Support
- MAC Address Filter Service

Network Diagram

 Support Protocol and Service

High-End RISC Microprocessor

NAND Flash Memory
DDR2 Memory
Network Interface
 LAN0 Port
 One(1) 10/100Mbps Fast Ethernet
LAN1 Port
 One(1) 10/100Mbps Fast Ethernet
 Console Port
 One(1) RS-232C Interface
Voice Interface Module
 1-Port PBX Digital E1/T1 Module (1 x RJ45)
 2-Port PBX Digital E1/T1 Module (2 x RJ45)
Power Requirement
 VAC 110~220V, 50/60Hz, 5V 5A
Operating Temperature
 0°C to + 50°C (32° to 122°F)
Storage Temperature
 -40°C to + 85°C (-40° to 176°F)
Relative Humidity
 5% to 95% (Non-condensing)
Dimensions(H x W x D)
 60mm x 214mm x 266mm

 Ordering Information

Routing Protocols
 IPv4 Static and IEEE 802.1Q VLAN Routing
Basic Network Protocols
Voice over IP Services
 H.323, SIP Dual Stack Support
 ISDN-PRI, R2 Signaling Protocol Support
 ITU-T H.323 v3 VoIP Protocol with ITU-T H.235 Security Feature
 SIP protocol support compliant with IETF RFC3261(or RFC2543)
 G.723.1, G.729.A, G.711 Voice Compressions
 Voice Processing Features Supports
 - VAD, DRMF, CNG, G.168 and T.38 FAX Relay
 ITU-T H.323 Gateway, Gatekeeper Support
 Enhanced QoS Management Features for Voice Traffics
Network Management
 Standard SNMP Agent (MIB v2) Support
 Traffic Queuing and Frame-Relay Flow Control
 Remote Management using Console, Rlogin, Telnet
 Web based Managements using HTTP Server Interface
Security Functions
 Standard & Extended IP Access List
 Access Control and Data Protections
 Enable/Disable for Specific Protocols
 Multi-Level User Account Management
 Auto-disconnect for Telnet/Console Sessions
 PPP User Authentication Supports
→ Password Authentication Protocol(PAP)
→ Challenge Handshake Authentication Protocol (CHAP)
Operation &
 System Performance Analysis for Process, CPU, Connection I/F
 Configuration Backup & Restore for APOS Managements
 Debugging, System Auditing, and Diagnostics Support
 System Booting and Auto-rebooting with Watchdog Feature
 System Managements with Data Logging
 IP Traffic Statistics with Accounting
Other Scalability Features
 DHCP Server & Relay Functions
 Network Address Translation (NAT) Function
 Port Address Translation (PAT) Function
 Transparent Bridging (IEEE Standard) F
 → Spanning Tree Bridging Protocol Support
 → Remote Bridging Support
 → Concurrent Routing and Bridging Support
 Cisco Style Command Line Interface(CLI)
 Network time Protocol(NTP) Support

No comments:

Post a Comment