AP-VAC700 12-inch LCD SIP video intercom is an IP video interphone that is installed at the entrance and performs access control functions while viewing the video screen using the Internet. Using SIP standard VoIP signal processing function, it has excellent scalability by linking with AddPac IP-PBX, video phone, and soft phone. It also optimally supports the latest audio/video codecs. Now, the selection criteria for IP video door phones are acceptance of the VoIP standard signal system and convenience. We provide enterprise SIP video access control solutions with the ACS1500 IP video door access control system. For various application services, AP-VAC700 is equipped with a 12-inch TFT-LCD based on a touch screen. AP-VAC700 IP video interphone is designed to allow selection of various screen layouts (single button speed dial, 3x4 dial keypad, 20 speed dial buttons).
AP-AVC700 SIP Video Interphone is an IP video interphone that adds advanced video processing technology to the signaling technology and voice processing technology that AddPac has accumulated in the VoIP field. AP-VAC700 supports networks bandwidth ranging from 64Kbps to 4Mbps, so it can be used anywhere with an Internet connection.In particular, it ensures optimal video quality by applying the 'rate control' function to ensure optimal video quality and frame rate in limited bandwidth situations and high-end error resilience technology to respond to various packet errors on the Internet. The two-way video call function, which allows users to view the screen of the remote caller at call center on the video door phone, is designed to be optionally supported. Supports the latest H.264 video codec.
AP-VAC700 supports SIP standard protocol in terms of call control protocol.Therefore, it has excellent interoperability with various VoIP terminals such as video phones with standard SIP call control protocols. In addition, it is provided with AddPac door control systems for interoperability with IP-PBX and SIP proxy servers, which are gradually being introduced, as well as interoperability with existing analog-type PBXs, allowing entry and exit while watching video even in an in-house network rather than an IP environment. We can provide services that you can control.
Option : Face Recognition Function Module
AP-VAC700 SIP video interphone can optionally support face recognition by installing a face recognition module on the top of AP-VP700. For internal employees, access control is performed using non-contact facial recognition. The face recognition module consists of a left camera (Full HD), a right camera (Full HD), LED (850nm IR), projector sensor (850nm IR), and a high-performance SoC chip. It is separated into front processing for anti-spoofing (fake identification) and main authentication function for face recognition, supporting excellent performance for face recognition services.
Main Features
- High-performance/high-quality HD-level SIP video intercom solution, option: face recognition function module
- Face Recognition Function Module : Left Camera(Full HD), Right Camera (Full HD), LED (850nm IR), Projector (850nm IR)
- Equipped with Full HD camera sensor (for video calls with non-registered outsiders), 30 frames per second camera sensor
-Use of separate independent DSP signal processing processors for video and voice only
- HD-level 12-inch LCD, 1280x720 touch screen LCD
- Built-in microphone and speaker
- Supports touch screen-based speed dial, 3x4 dial keys, and 20 speed dial keys
- SIP VoIP signaling support
- RTSP/RTP support (CCTV camera mode supported), DHCP, etc.
- Supports high-performance HD video codec: H.264, etc.
- Supports 30fps (frame per second) video resolution: 720p (1280x720), VGA (640x480), etc.
No comments:
Post a Comment