Voicefinder AP-SVG3000 is a maximum 8 port STT(Speech to Text) VoIP Gateway for Network based STT(Speech to Text) Application. This STT VoIP
Gateway supports high quality G.722 16KHz VoIP codec beside 8KHz VoIP codec
like as G.711,G.726,G.729A, etc. AP-SVG3000
provides four(4) STT VoIP module slots, and each slots supports two(2)-port STT
VoIP module. The STT VoIP module provides one(1) 10/100Mbps fast ethernet port,
one(1) RS232C console port for command line interface, 3.5mm analog audio
input/output port, and RJ45 connector type radio interface port independently.
Radio Interface is used for interconnection with radio system like as Motorola,
ICOM, etc. Pin assignment for radio interface are Tx audio, Rx audio, Tx PTT,
Rx PTT lines. 3.5mm analog audio output interface is reserved for future application. 3.5mm analog audio input interface can be
used for network based call center STT application.
Scalability and
cost effective STT voice recognition solution
5G wireless network and broadband network services
are rapidly expanding in the field of voice recognition, which is a core
technology, in addition to cloud computing, robots, AI, and big data technology.
VoIP gateways for high quality IP based voice recognition are the first step in
integrating into an IP network, so be careful about introducing them. Pay close
attention to the AP-SVG3000 if you need to choose products that are highly
scalable and proven to be affordable. AP-SVG3000 is a 16KHz G.722 high quality
voice recognition VoIP gateway that provides a clear opportunity to start small
and start looking bigger.
Maximum 8 Port
STT VoIP Gateway, Each Port provides Independent STT VoIP Gateway Service
The
AP-SVG3000 is a STT (Speech to Text) VoIP gateway that can configure up to 8
ports of analog voice channels. At the time of introduction, AP-STT2 2-channel
STT VoIP module is installed and used. When it is time to increase the number
of channels, up to 8 channels can be flexibly coped with the demand for channel
expansion. In addition, with the hot-swap function, AP-STT2 2 channel STT
module in service can be replaced without needing to switch off the power
supply in case of failure or replacement. It is a good choice for customers who
want AP-SVG3000 high performance STT VoIP gateway. The STT VoIP module used in
the AP-SVG3000 operates independently for each port and can support various
VoIP voice codecs such as 8KHz G.711, G726, and G.729A in addition to the 16KHz
G.722 wideband voice codec. The voice interface supports the radio interface
(RJ45) in addition to the audio I / O interface. In addition, it supports
RS232C (RJ45) interface for CLI (Command Line Interface)
High Quality
VoIP Service and Additional Various Services
AddPac
VoIP gateway series is recognized for its performance and stability in Korea as
well as the world market. AP-SVG3000, which has accumulated experience and
know-how accumulated in the enterprise market and service provider market for
AddPac, will provide high satisfaction in terms of various services to meet the
needs of customers who want high quality VoIP service. First, in terms of VoIP
call control protocol, AP-SVG3000 supports H323 and SIP concurrently. In
addition, AddPac's unique QoS algorithm is added to general QoS (Quality of
Service) algorithm to support superior VoIP call quality in any network
environment.
Network Diagram
No comments:
Post a Comment