Showing posts with label ZWave sensor control. Show all posts
Showing posts with label ZWave sensor control. Show all posts

Monday, July 9, 2018

AP-VAC300 Enterprise SIP Video Door Phone




AP-VAC300 enterprise SIP video door phone is a visitor access control unit through video screen using internet. It uses the SIP standard video signal process feature, providing an excellent scalability by interworking with IP video phone, and soft video phone. It also supports the latest audio/voice codec at the optimum level. AP-VAC300 provides enterprise SIP video based visitor access control solution. For various application and flexible service, this product use 7inch TFT-LCD with touch screen feature.


AP-VAC300 and AP-VAC300ZW Comparison Table





Standalone SIP based Video Door Phone Service + Door Control System

AP- VAC300 SIP video door phone is a device to open and close the door after verifying the identity of visitor. It is embedded with alarm, relay output port, and RS485 interface function to control the door remotely by interworking with automatic door. Also, it offers RF card for easier access of employees. AP-VAC300 supports both SIP video door phone management service and SIP based video door phone service. SIP based video door phone management function provides user management function, group management function, setup management function, RF card register and manages, and access log function. 

New Standard Selection of SIP Video Door Phone “ Full Duplex + Acoustic Echo Canceller”

AP-VAC300 SIP video door phone is combination of SIP VoIP signaling technology/video processing technology. AP-VAC300 provides 64Kpbs level of network so that user may use anywhere with internet connection. Especially, it applies high end “Error Resilience” technology to cope with various packet errors to secure optimum level of voice quality in limited bandwidth environments. It also supports G.722 wide band codec along with G.711, G.726 voice band codec. And, for enhanced voice quality, AP-VAC300 supports full duplex voice communication scheme and acoustic echo canceller. 
AP-VAC300 is a new IP video door phone for enterprise, factory, etc where Internet voice communications are combined with Internet video monitoring. This product provides advanced features and services such as video codecs (e.g. H.263, MPEG-4, and H.264), QoS, and public IP sharing as well as multiple VoIP signaling protocols such as SIP and H.323. Also, this product supports USB based wifi LAN interface besides one(1) fast ethernet port. Using this dual LAN interface, AP-VAC300 can support wire network environment as well as wireless network environment. 

Z-Wave Sensor Interface Support : (Opiton : AP-VAC300ZW Model)

AP-VAC300ZW IP video door phone supports the Z-Wave Sensor Interface for various Z-Wave based sensor device direct supporting like as motion sensor, light switch sensor, door open/close sensor, etc. This wireless Z-Wave sensor interface feature besides legacy wired based alarm signal will very helpful for various applications at door side. 
And the Z-Wave Interface of AP-VAC300 is compatible with Z-Wave base smart sensors from various manufactures, AP-VAC300ZW can easily add new smart sensor devices in your smart sensor network like as at various enterprise environment application. 

Firmware Upgradeable Structure

AP-VAC300 RISC CPU and DSP are all programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.

Smart Web Manager Function

AP-VAC300 is embedded with Smart Web Manager for easy control of SIP video door phone. User may setup/manage IP video door phone through PC, smart phone, and tablet device.

AddPac VoIP and Multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-VAC300 will satisfy the needs of customer along with AddPac IP video door access solution.




Network Diagram













Tuesday, June 14, 2016

AP-SWP80 Sensor Control Wall Pad

AP-SWP80  Sensor Control Wall Pad















AP-SWP80 sensor control wall PAD is a 5inch touch screen LCD based sensor control and monitoring wall PAD device for zigbee/zwave sensor devices. It uses LAN interconnection feature, providing an excellent scalability by interworking with AddPac Smart Hub and Smart Sensor Network Controller for various zigbee/zwave sensor device control. AP-SWP80 sensor control wall PAD will help to control to various zigbee/zwave based sensors, light switches, thermostats, and other devices. 


Total Solution for Smart Sensor Device Application

AddPac IoT (Internet of things) equipment solution is to control and monitor zigbee/zwave sensor devices for various filed application. AddPac IoT equipment solution consists of smart hub and enterprise smart hub for zigbee/zwave sensor devices, smart hub control PAD, smart sensor control wall PAD, various zigbee/zwave based sensor devices, smart sensor network controller, application specific management software, and smart pad/tab and smart phone appl, to provide an excellent scalability. 

Firmware Upgradeable Structure

AP-SWP80 RISC CPU is programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.

Smart Web Manager Function

AP-SWP80 is embedded with smart web manager for easy control. User may setup/manage sensor control wall PAD through PC, smart phone, and tablet device.

AddPac various VoIP, Video and multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-SWP80 will satisfy the needs of customer along with AddPac smart senor application solution.


Network Diagram






AP-SWP100 Sensor Control wall PAD

AP-SWP100 Sensor Control wall PAD






AP-SWP100 sensor control wall PAD is a 7inch touch screen LCD based sensor control and monitoring wall PAD device for zigbee/zwave sensor devices. It uses LAN interconnection feature, providing an excellent scalability by interworking with AddPac Smart Hub and Smart Sensor Network Controller for various zigbee/zwave sensor device control. AP-SWP100 sensor control wall PAD will help to control to various zigbee/zwave based sensors, light switches, thermostats, and other devices. Also, this product supports USB based WiFi LAN interface besides one(1) wired fast ethernet port.



Total Solution for Smart Sensor Device Application


AddPac IoT (Internet of things) equipment solution is to control and monitor zigbee/zwave sensor devices for various filed application. AddPac IoT equipment solution consists of smart hub and enterprise smart hub for zigbee/zwave sensor devices, smart hub control PAD, smart sensor control wall PAD, various zigbee/zwave based sensor devices, smart sensor network controller, application specific management software, and smart pad/tab and smart phone appl, to provide an excellent scalability. 
Firmware Upgradeable Structure

AP-SWP100 RISC CPU is programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.

Smart Web Manager Function

AP-SWP100 is embedded with smart web manager for easy control. User may setup/manage sensor control wall PAD through PC, smart phone, and tablet device.

AddPac various VoIP, Video and multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-SWP100 will satisfy the needs of customer along with AddPac smart senor application solution.


Network Diagram

Security protocol overview for AddPac IoT Solution


Security protocol overview for AddPac IoT Solution















AP-SH50ZW Smart Hub for Zwave Sensors

AP-SH50ZW Smart Hub for Zwave Sensors














AP-SH50ZW smart hub for ZWave sensors is an IP connectivity device for ZWave sensor devices. It uses LAN interconnection feature, providing an excellent scalability by interworking with various ZWave sensor devices. AP-SH50ZW smart hub and AP-SH50ZW application software for smart phone will help to connect to various ZWave based sensors, light switches, thermostats, and other devices. And since this smart hub is compatible with ZWave base smart sensors from various manufactures, AP-SH50ZW smart hub can easily add new smart sensor devices in your smart sensor network like as at home, outdoor collaboration application, etc. 



Total Solution for Smart Sensor Device Application (Smart Home, Smart Security, etc)

AddPac smart home equipment solution is to control ZWave smart home sensor devices, to control the visitor access through SIP video door phone which can be installed at the home entrance, and to monitor the smart home IP camera video with internet connectivity. AddPac smart home equipment solution consists of smart wall pad(AP-VWP150, AP-VWP100), sip video door phones, smart hub for ZWave sensor devices, various ZWave based sensor devices, video phones for security guard, and smart pad/tab and smart phone appl, to provide an excellent scalability. 

External Antenna Type for ZWave Sensor Interface 

AddPac AP-SH50ZW smart hub for ZWave sensor devices supports the external antenna interface for ZWave sensor interface. For indoor application like as home, small & short antenna style is recommended and this short antenna is directly connected on antenna interface connector of AddPac smart hub. AddPac supports several antennas such as AP-Z-ANT0, AP-Z-ANT1, AP-Z-ANT2 for AP-SH50ZW according to ZWave application, location (indoor, outdoor, basement), etc. 
AP-Z-ANT0 has no cable and very easy to handle. This antenna is very comfortable when AP-SH50ZW smart hub is installed in open space and very close to window side in home or office building when smart sensor is located in window closed area. 
AP-Z-ANT1 antenna has 2m cable length. So this antenna is very applicable when smart hub is installed in side of home or building and smart sensors are located in outdoor area. This antenna provides reasonable performance when smart hub installation location is also close to window side in office building. But it is little bit difficult to handle and manage because this antenna also has 2m cable length. 
AP-Z-ANT2 gsm antenna has 20m cable length and big antenna height comparing with previous one. This antenna is special ordering item and expensive. Normally long distance cable antenna length means antenna performance degradation due to resistance characteristic. To compensate performance degradation due to cable length, we increase the antenna height and cable diameter. This antenna is very useful for underground installation when smart hub installation location is too far to window side in office building especially. 

Firmware Upgradeable Structure

AP-SH50ZW RISC CPU is programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.

Smart Web Manager Function

AP-SH50ZW is embedded with smart web manager for easy control of smart hub. User may setup/manage smart hub through PC, smart phone, and tablet device.

AddPac various VoIP, Video and multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-SH50ZW will satisfy the needs of customer along with AddPac smart senor application solution.



Network Diagram






AP-SH30 Smart Hub Cloud for Zwave Sensors


AP-SH30 Smart Hub Cloud for Zwave Sensors











AP-SH30 smart hub cloud for ZWave sensors is an IP connectivity device for ZWave sensor devices. It uses LAN interconnection feature, providing an excellent scalability by interworking with various ZWave sensor devices. AP-SH30 smart hub and AP-SH30 cloud computing based application software for smart phone will help to connect to various ZWave based sensors, light switches, thermostats, and other devices. And since this smart hub is compatible with ZWave based smart sensors from various manufactures, AP-SH30 smart hub cloud can easily add new smart sensor devices in your smart sensor network like as at home, outdoor collaboration application, etc. 




Smart Hub Solution for Large Scale Cloud Computing (Smart Home, Smart Security, etc)

AddPac smart hub cloud solution is to control ZWave smart home sensor devices with internet connectivity for large-scale deployment and operators. AP-SH30 ZWave hub supports cloud computing based web service and application software for smart phone, tab, pads, PC etc. Also, this smart hub device supports standalone mode and provides internal smart web manager. 

External Antenna Type for ZWave

AddPac AP-SH30 smart hub for ZWave sensor devices supports the external antenna interface for ZWave sensor interface. For indoor application like as home, small & short antenna style is recommended and this short antenna is directly connected on antenna interface connector of AddPac smart hub. AddPac supports several antennas such as AP-Z-ANT0 for AP-SH30 according to ZWave application, location (indoor, outdoor, basement), etc. 
AP-Z-ANT0 has no cable and very easy to handle. This antenna is very comfortable when AP-SH30 smart hub is installed in open space and very close to window side in home or office building when smart sensor is located in window closed area. 


AddPac various VoIP, Video and multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-SH30 smart hub cloud device will satisfy the needs of customer along with AddPac smart IoT (Internet of things) senor application solution.



Network Diagram

Tuesday, May 3, 2016

AP-SH300 Triple Sensor Smart Hub for Zwave, Zigbee, BLE Technical document

















 






AP-SH300 Triple Sensor IoT Smart Hub

AP-SH300 Triple Sensor IoT Smart Hub
















AP-SH300 smart hub is a triple sensor IP connectivity device for zigbee, zwave, BLE(Bluetooth Low Energy) sensor devices. It uses LAN interconnection feature, providing an excellent scalability by interworking with various zigbee/zwave/BLE sensor devices. AP-SH300 smart hub and AP-SH300 application software for smart phone will help to connect to various zigbee/zwave/BLE based sensors like as light switches, thermostats, and other devices. And since this smart hub is compatible with zigbee/zwave/BLE base smart sensors from various manufactures, AP-SH300 smart hub can easily add new smart sensor devices in your smart sensor network like as at home, outdoor collaboration application, etc. 


Total Solution for Smart Sensor Device Application (Smart Home, Smart Security, etc)

AddPac smart home equipment solution is to control zigbee/zwave/BLE smart home sensor devices, to control the visitor access through SIP video door phone which can be installed at the home entrance, and to monitor the smart home IP camera video with internet connectivity. AddPac smart home equipment solution consists of smart wall pad(AP-VWP80, AP-VWP100), sip video door phones, smart hub for zigbee/zwave/BLE sensor devices, various zigbee/zwave/BLE based sensor devices, video phones for security guard, and smart pad/tab and smart phone appl, to provide an excellent scalability. 

External Antenna Type for Zigbee/Zwave/BLE

AddPac AP-SH300 smart hub supports the external antenna interface for zigbee/zwave/BLE. For indoor application like as home, small & short antenna style is recommended and this short antenna is directly connected on antenna interface connector of AddPac smart hub. AddPac supports several antennas such as AP-Z-ANT0, AP-Z-ANT1, AP-Z-ANT2 for AP-SH300 according to zigbee/zwave/BLE application, location (indoor, outdoor, basement), etc. 
AP-Z-ANT0 has no cable and very easy to handle. This antenna is very comfortable when AP-SH300 smart hub is installed in open space and very close to window side in home or office building when smart sensor is located in window closed area. 
AP-Z-ANT1 antenna has 2m cable length. So this antenna is very applicable when smart hub is installed in side of home or building and smart sensors are located in outdoor area. This antenna provides reasonable performance when smart hub installation location is also close to window side in office building. But it is little bit difficult to handle and manage because this antenna also has 2m cable length. 
AP-Z-ANT2 gsm antenna has 20m cable length and big antenna height comparing with previous one. This antenna is special ordering item and expensive. Normally long distance cable antenna length means antenna performance degradation due to resistance characteristic. To compensate performance degradation due to cable length, we increase the antenna height and cable diameter. This antenna is very useful for underground installation when smart hub installation location is too far to window side in office building especially. 

Firmware Upgradeable Structure

AP-SH300 RISC CPU is programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.

Smart Web Manager Function

AP-SH300 is embedded with smart web manager for easy control of smart hub. User may setup/manage smart hub through PC, smart phone, and tablet device.

AddPac various VoIP, Video and multimedia products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-SH300 will satisfy the needs of customer along with AddPac smart sensor application solution.