AP2800-100FX Network Module

AP2800-100FX Metro Ethernet Interface module offers various services such as L3 routing, QoS, VoIP Gateway, audio broadcasting terminal service by installed at VoiceFinder AP2850 & AP2830 Multi-service Routers. 

A perfect solution overcoming the demerits of Metro Ethernet

Even though the Metro Ethernet is valued as very effective solution for WAN access including Internet access, it is only used for Internet access or point-to-point access. So its broad bandwidth of 10~100Mbps is not applied appropriately. AP-100FX Interface module of AP2850 and AP2830 is a new solution to overcome this shortcomings targeting government/ public offices, campuses, enterprises and cyber apartments. 

Supports Integrated IP applications

By installing VoIP interface module, audio interface module and V. 35 frame relay interface module at AP2850 or AP2830, AP2800-100FX opens a new horizon of Metro Ethernet service overcoming Broad bandwidth, poor application.??/SPAN> Especially, AP2850 and AP2830 Multi-service Router with AP-100FX Metro Ethernet module offer not only simple switching but also QoS routing service of L3 routing. Now, even in Metro Ethernet environment, enjoy reliable VoIP telephony service and audio broadcasting service as well.

AP2800-ATMOC3 Network Module

AP2800-ATMOC3 Metro ATM Interface module offers various services such as L3 routing, VoIP Gateway, audio/ video service by installed at VoiceFinder AP2850 & AP2830 Multiservice Routers. It realizes both cost effective communication and ATM QoS with Virtual Channel access. 

An ultimate solution realizing the merits of both ATM and Metro Ethernet 

'Access' and 'Edge' applications are most active field in ATM. AP2800-ATMOC3 module offers Broadband ATM network access solution at the subscriber node. AP2800-ATMOC3 module is a powerful solution offering ATM QoS by supporting Virtual Channel access. ATM is an advanced technology to ensure QoS such as Cell Loss, Cell Delay Variance, and Maximum Cell Transfer Delay. That is, it keeps the virtual channel when there is no data transmission to ensure QoS. 

Modularized architecture supporting various integrated IP applications 

VoiceFinder AP2850 and AP2830 Multi-service Routers with AP2800-ATMOC3 module can offer not only 155Mbps Metro ATM access function and L3 routing service, but also additional various multimedia IP application services such as VoIP Gateway, IP audio broadcasting, IP video and etc. Now, AP2850 and AP2830 Multi-service Router can offer integrated service of ATM access, Layer 3 routing and various IP applications. Especially, AP2800-ATMOC3 module realizes reliable network access with PVC access function along with enhanced QoS realizing superior quality of voice and video service without affected by the bandwidth change.

AP2800-2LAN1V35 Network Module

AP2800-2LAN1V35 interface module supports PPP, HDLC, Frame Relay(PVC) protocols on leased line circuit as a single channel V.35 interface module, installed on network module slots of AP2850 and AP2830. It is composed of two 10/100Mbps fast ethernet interfaces for LAN connection, an 1-port RS-232C console interface and an 1-port asynchronous serial interface(RJ45). 

AP2800-2LAN1V35 interface module supports full-duplex service on T1(1.544 Mbps) and E1(2.048 Mbps) environment to realize full utilizable bandwidth. One of its powerful features is supporting the advanced QoS(Quality of Service) features. 

Designed with the optimized performance for stable networking services, AP2800-2LAN1V35 single channel V.35 interface module becomes the best solution for businesses to connect headquarters to multiple branch offices with Frame Relay or leased line circuit.

AP2800-ATM4E1 Network Module

AP2800-ATM4E1 is a network module of AP2850 & AP2830 multi-service Router supporting 4-port multiple E1 ATM interface, IMA (Inverse Multiplexing over ATM) interface and 2-port 10/100Base-T network interface. 

ATM IMA feature combines number of ports and utilizes the port as an extended link. So without introducing additional devices or modifying the existing devices, it can expand the network bandwidth flexibly in case of network traffic increase.

AP2800-ATM1E1 Network Module

AP2800-ATM1E1 is 1-port E1 ATM interface module for AP2850 & AP2830 multi-service Router. It offers 2 10/100Base-T ports for internal LAN connection. 

With this module, PassFinder AP2830 & AP2850 multi-service Router can offer QoS, various router service, diverse extended network service such as DHCP and NAT/PAT along with network applications such as L3 Routing service, VoIP Gateway, audio service and etc.

AIM-V35FR6 Network Module

AIM-V35FR6 V.35 module can be equipped with AP4810, AP4820, AP5840 multi-service routers supporting six (6) V.35 interfaces. By connecting to the main chassis via high-performance PCI interface, it realizes perfect bandwidth redundancy in case of full, 6-channel operation status. 

AIM-V35FR6 realizes 100% line utilization ratio by supporting Full-Duplex (FDX) service on both T1 (1.544 Mbps) and E1 (2.048 Mbps) environment. Not only PPP and HDLC access features, it offers PVC (Permanent Virtual Circuit) access feature based on Frame Relay realizing state-of-art QoS (Quality of Service). 

AIM-V35FR6 multi-channel V.35 interface module is an ultimate solution for the companies utilizing Frame Relay or leased line service connecting the main and branch offices. Moreover, users can flexibly deal with the future network expansion requirements with the AIM-V35FR6 module without further investment.

AIM-V35FR2 Network Module

AIM-V35FR2 module can be equipped with AP4810, AP4820, AP5840 multiservice routers supporting two (2) V.35 interfaces. By connecting to the main chassis via high-performance PCI interface, it realizes perfect bandwidth redundancy in case of full, 2-channel operation status. 

AIM-V35FR2 realizes 100% line utilization ratio by supporting Full-Duplex (FDX) service on both T1 (1.544 Mbps) and E1 (2.048 Mbps) environment. Not only PPP and HDLC access features, it offers PVC (Permanent Virtual Circuit) access feature based on Frame Relay realizing state-of-art QoS (Quality of Service). 

AIM-V35FR2 dual-channel V.35 interface module is an ultimate solution for the companies utilizing Frame Relay or leased line service connecting the main and branch offices.

AIM-V35FR1 Network Module

AIM-V35FR1 is a single port V.35 interface module which can be connected with a multi-service Router such as AP4810, AP4820, AP5840, AP-VR2000 etc. This module guarantees rich bandwidth redundancy by connecting a multi-service Router to a PCI interface.

AIM-V35FR1 is designed to provide an optimal condition of stable networking and video communication by connecting it with leased line or various Frame-Relay. 

Also AIM-V35FR1 ensures 100% line utilization by supporting Full-Duplex(FDX) service in T1(1.544Mbps) and E1(2.048Mbps) environments. Moreover, it delivers reliable QoS(Quality of Service) by supporting PPP, HDLC and Frame-Relay based PVC(Permanent Virtual Circuit) connection function.

AIM-HSSI Network Module

The rapid growth of the Internet applications has amplified the bandwidth requirement, thus the higher performance of network routers are requested at the market. AddPac Technology's AIM-HSSI, High Speed Serial Interface Module, enables high-speed & high-performance WAN connectivity by comprised at AP4820 Multi-service Router and AP4810 ATM Switching Gateway. 

It offers maximum 52Mbps serial connectivity service. With the addition of AIM-HSSI, the users can experience increased port density and flexibly cope with the bandwidth intensive audio and multi-media services.

AIM-ATM1E1 Network Module

AIM-ATM1E1 is a network module which can be connected with a multi-service Router such as AP5840, AP-VR2000 or AP4810, AP4820 Router which has 1 port ATM E1 interface. This module guarantees rich bandwidth redundancy by connecting a multi-service Router to a high-performance PCI interface. 

Routers with an AIM-ATM1E1 module such as AP4810 AP4820 and multi-service Routers such as AP5840, AP-VR2000 provide high-performance QoS, various routing services and network expansion services such as DHCP, NAT/PAT. 

Therefore AIM-ATM1E1 is a foundation for high-performance multi-media service including data networking, high quality video and voice communications.

AIM-ATM25M Network Module

AIM-ATM25M is 25Mbps ATM network access module which can be installed at AP4820 multi-service Router and AP4810 Switching Gateway. It offers reliable ATM QoS feature with Virtual Channel connection along with reduced communication fee at the same time. 

Especially, AP48XX system with AIM-ATM25M module can process multi-media traffic without delay based on CBR, UBR, NRT-VBR, RT-VBR ATM traffic service technology. Also, its ATM Virtual Circuit feature can be used for in-house VPN (Virtual Private Network) service.

AIM-POSDS3-1 Network Module

AIM-POSDS3-1 module supports PoS (Packet over SONET/SDH) protocols realizing reliable high-speed fiber network access service for enterprises. 

Also, it offers 45Mbps ATM access service by installed at AP4820 Multi-service Router and AP4810 ATM Switching Gateway.

AIM-ATMDS3-1 Network Module

AIM-ATMDS3-1 module offers 45Mbps ATM access service by installed at AP4820 Multi-service Router and AP4810 ATM Switching Gateway. It offers reliable ATM QoS feature with Virtual Channel connection along with reduced communication fee at the same time. 

Especially, AP48XX system with AIM-ATMOC3-1 module can process multi-media traffic without delay based on CBR, UBR, NRT-VBR, RT-VBR ATM traffic service technology. Also, its ATM Virtual Circuit feature can be used for in-house VPN (Virtual Private Network) service.

AIM-ATMOC3-1 Network Module

AIM-ATMOC3-1 module offers 155Mbps broadband ATM access service by installed at AP4820 Multi-service Router and AP4810 ATM Switching Gateway. With this module, the users can experience guaranteed 100% line utilization. 

Especially, AP48XX system with AIM-ATMOC3-1 module can process multi-media traffic without delay based on CBR, UBR, NRT-VBR, RT-VBR ATM traffic service technology. Also, its ATM Virtual Circuit feature can be used for in-house VPN (Virtual Private Network) service.

HIM-V35FR2 Network Module

HIM-V35FR2 module can be equipped with APAP5850 multiservice routers supporting two (2) V.35 interfaces. By connecting to the main chassis via high-performance PCI interface, it realizes perfect bandwidth redundancy in case of full, 2-channel operation status. 

HIM-V35FR2 realizes 100% line utilization ratio by supporting Full-Duplex (FDX) service on both T1 (1.544 Mbps) and E1 (2.048 Mbps) environment. Not only PPP and HDLC access features, it offers PVC (Permanent Virtual Circuit) access feature based on Frame Relay realizing state-of-art QoS (Quality of Service). 

HIM-V35FR2 dual-channel V.35 interface module is an ultimate solution for the companies utilizing Frame Relay or leased line service connecting the main and branch offices.

HIM-V35FR6 Network Module

HIM-V35FR6 V.35 module can be equipped with AP5850 multi-service routers supporting six (6) V.35 interfaces. By connecting to the main chassis via high-performance PCI interface, it realizes perfect bandwidth redundancy in case of full, 6-channel operation status. 

H IM-V35FR6 realizes 100% line utilization ratio by supporting Full-Duplex (FDX) service on both T1 (1.544 Mbps) and E1 (2.048 Mbps) environment. Not only PPP and HDLC access features, it offers PVC (Permanent Virtual Circuit) access feature based on Frame Relay realizing state-of-art QoS (Quality of Service). 

H IM-V35FR6 multi-channel V.35 interface module is an ultimate solution for the companies utilizing Frame Relay or leased line service connecting the main and branch offices. Moreover, users can flexibly deal with the future network expansion requirements with the HIM-V35FR6 module without further investment.

HIM-FELAN6 Network Module

HIM-FELAN6, a network module, is consists of 6-port 10/100Mbps Fast Ethernet switch Interface that can be placed on AP5850 multi-service Router. 

This module enables flexibility for switching group configuration by combining built in 4-port 10/100Mbps Ethernet Interface. 

AP5850 ensures rich bandwidth redundancy using HIM-FELAN6 modules and stability at board failover using hot swap feature of this module.

HIM-GELAN1 Network Module

HIM-GELAN1 module which is placed on A5850 multi service router is a single port gigabit ethernet interface network module, supporting RJ45 type and optical module interface. 

HIM-GELAN1 is combined with the independent built-in 10/100Mbps ethernet interface to correspond flexibly to network building which needs the gigabit transferring interface like the unicast high-quality video broadcasting. 

HIM-GELAN1 enables the communication of the main chassis and the PCI interface, guaranteeing rich broadband redundancy. It also makes equipment maintenance easy with the hotswap mode which enables the module replacement during the system operation.

HIM-VoIP4E1 Network Module

HIM-VoIP4E1 module is a high scalability VoIP media gateway module with maximum 120 channels. It is placed on the multi service router and the high performance media gateway such as AP5850 and AP-MG5000 etc. 

HIM-VoIP4E1 interworks with the private automatic branch exchange, PSTN and digital E1, supporting the signaling systems such as ISDN-PRI, MFC-R2, DTMF and SS7 etc. The capacity of a single module reaches up to 120 voice channels. The module brings stable VoIP QoS function and cost-cut at the same time in various network. 

HIM-VoIP4E1 not only supports triple call control protocols of H.323, SIP and MGCP concurrently in single embedded OS but also guarantees high quality voice communication with standard QoS and AddPac's unique QoS algorithm in various IP network environment. 

HIM-VoIP4E1 module enables the communication of the main chassis via PCI interface, guaranteeing rich bus bandwidth and makes equipment maintenance very easy with the hotswap mode which enables module replacement during the system operation.

HIM-AV1000 Network Module

HIM-AV1000 is a high-performance IP based video and audio encoding/decoding codec module which can be placed on the AP5850 multi service router. Since designed along with the programmable DSP, the various and useful AV codec firmwares for the specific applicable services can be downloaded or upgradable from the host CPU. 

One of powerful features is to support the high quality video processing most efficiently without transmission delay because high performance DSP codec module, HIM-AV1000 is directly placed into the multi service router slot. Furthermore, it supports the hotswap mode that enables module replacement during the system operation and multiple HIM-AV1000s are able to be placed and operated in the extra slots of AP5850. 

In case that HIM-AV1000 is placed and operated in the multi service router, VGA-level video(30 frame/sec, 640×480, MPEG4) can be transmitted via the multi service router. HIM-AV1000 supports not only the video processing feature but the integrated CD-level high quality audio service with 3.5mm stereo audio interface. Extra RS232/RS422 controlling port supports camera control functions such as pan/tilt, zoom.